Low cost 30psi fluid pressure sensor
2016-02-19
Hello Sendo Sensor
We are looking for a quote for a low cost 30psi fluid pressure sensor that operates on 5V with a connector and a lead length of about 18”. Stainless is preferable. Perhaps one from the SS207 family is the correct one for our application. Could you please provide a quote for 20 each, and annual quantity quotes of 100, 200, 500, and 1000?
The machine type cannot be disclosed at this time.The medium is fluid comprised of distilled water and propylene glycol mixture. (80/20) With a corrosion inhibitor. The fluid working temperature is +30F to +125F. The ambient temperature is +50F to +130F. Output signal of 0.5-4.5V is what we are currently using. Is an output of 0.5-3.5V feasible? The pressure port on the sensor we use now is 1/8” NPT. So that it is preferred.
Solution: Piezoresistive Pressure Transmitter for severe medium applications
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Hello Sendo Sensor
We are looking for a quote for a low cost 30psi fluid pressure sensor that operates on 5V with a connector and a lead length of about 18”. Stainless is preferable. Perhaps one from the SS207 family is the correct one for our application. Could you please provide a quote for 20 each, and annual quantity quotes of 100, 200, 500, and 1000?
The machine type cannot be disclosed at this time.The medium is fluid comprised of distilled water and propylene glycol mixture. (80/20) With a corrosion inhibitor. The fluid working temperature is +30F to +125F. The ambient temperature is +50F to +130F. Output signal of 0.5-4.5V is what we are currently using. Is an output of 0.5-3.5V feasible? The pressure port on the sensor we use now is 1/8” NPT. So that it is preferred.
Solution: Piezoresistive Pressure Transmitter for severe medium applications
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor