Flush type pressure sensor for food industry
2015-05-25
Hi sendo sensor, we need pressure sensors regularly, for food industry. The sensor must have a totally flush (flat) surface, I mean plain surface, without the ridge on the side, and the range we look for is near about 3 to 5 m water column. the sensor should have adjustment potentiometer for zero and span, many times at site this is needed and other companies also provide. The maximum temperature will be 85 deg C.
SS402 Series Flush Diaphragm Pressure Transmitter
***CE conformity
***Silicon oil filled
***Rugged Construction
***Output signals: 4 - 20 mA
***Measuring range: 0-0.3bar
***Field adjustable output range
***Stainless steel 316 diaphragm
***Typical G1/2” pressure connection
***Reverse polarity protection and current limit protection
Description
SS402 series flush pressure sensors utilize piezoresistive technology with a high performance silicon chip inside, the applied pressure acts on stainless steel 316L diaphragm, then pass to the silicon chip through silicon oil, available pressure ranges spanning from 5 psig up to 5800 psig. Typically applications: designed for use in food, process and industrial applications where the media is either viscous, or is otherwise liable to block the port of a conventional pressure transducer with a recessed diaphragm or pressure port.
Technical data
Performance (EN 60770)
Total error band(inside the compensated temperature range)
±0.5%
Response time
< 4 ms
Overload pressure
2 × FS
Pressure Range
0...0.3bar
Pressure type
vented gauge
Stability
≤0.2%FS/Year
Temp coefficient
±0.03%FS/°C
Electrical specifications
Output signal
4...20mA
Supply voltage
12...36Vdc
Polarity protected
YES
Short-circuit protected
YES
Environmental conditions
Medium temperature range
-40°C → +100°C
Ambient temperature range
-20°C → +85°C
Compensated temperature range
-10°C → +70°C
Mechanical characteristics
Materials
Diaphragm
Stainless steel 316L
Enclosure
Stainless steel 304
Electrical connections
PA
Weight (depending on pressure and electrical connection)
225-500g
Pressure Connection
G1/2"
Electrical Connection
DIN43650A
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
SS402 Series Flush Diaphragm Pressure Transmitter
***CE conformity
***Silicon oil filled
***Rugged Construction
***Output signals: 4 - 20 mA
***Measuring range: 0-0.3bar
***Field adjustable output range
***Stainless steel 316 diaphragm
***Typical G1/2” pressure connection
***Reverse polarity protection and current limit protection
Description
Technical data
Performance (EN 60770)
Total error band(inside the compensated temperature range) |
±0.5% |
Response time |
< 4 ms |
Overload pressure |
2 × FS |
Pressure Range |
0...0.3bar |
Pressure type |
vented gauge |
Stability |
≤0.2%FS/Year |
Temp coefficient |
±0.03%FS/°C |
Electrical specifications
Output signal |
4...20mA |
Supply voltage |
12...36Vdc |
Polarity protected |
YES |
Short-circuit protected |
YES |
Environmental conditions
Medium temperature range |
-40°C → +100°C |
Ambient temperature range |
-20°C → +85°C |
Compensated temperature range |
-10°C → +70°C |
Mechanical characteristics
Materials
Diaphragm
Stainless steel 316L
Enclosure
Stainless steel 304
Electrical connections
PA
Weight (depending on pressure and electrical connection)
225-500g
Pressure Connection
G1/2"
Electrical Connection
DIN43650A
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor