Shantu logo


  • English
  • العربية
  • français
  • Deutsch
  • Indonesia
  • italiano
  • 한국의
  • português
  • русский
  • español
  • Türkiye

SS103 piezoresistive OEM pressure transducer

SS103 piezoresistive OEM Pressure sensor

The SS103 and SS105 series stainless steel pressure sensor is the most economic version for pressure ranges from 100 mbar to 25 bar. The standard version is supplied with connecting pins.

A high-sensitivity piezoresistive silicon chip is used for pressure sensing. The chip is protected against ambient influences by a stainless steel housing sealed with a concentrically corrugated diaphragm. The housing is filled with silicone oil for the transfer of the pressure from the diaphragm to the sensing component.All metal parts in contact with the pressure media are made of stainless steel 316 L. The fully welded housing is vacuum-tight. The connecting pins allow direct PCB mounting or can be used for connecting cables. Typical Applications: Measurement of altitude, aviation electronics, meteorology, servo controls, robotics, hydraulics, sanitary and pharmaceutical engineering, underground mining, injection engineering......

Rugged, Small Dimensions, Light Weight
The piezoresistive chip immersed in silicone oil is welded into a housing made of stainless steel 316L. Diameter 19(15/14) mm; Height 5 mm; Weight 8 grammes.

High Sensitivity
A nominal signal of 100 mV is obtained at a supply current of 1.5 mA for standard pressure ranges.