Isolated pressure transducer 4bar absolute for steam pressure application
2015-02-12
Application:
Disposable indicator for monitoring sterilization procedures, should be a low cost pressure sensor which will be able to function in 140degC steam up to 3,8 bar absolute. It has to be all over encapsulated and protected against media.
Disposable indicator in this case means that there it lasts 500 cycles of sterilization then it is disposed (no battery change or recalibration). So it is basically disposable after shelf life. Longest sterilitation cycle last app 18 min, 134degC, 3,6 Bar abs. During this cycle steam is condesating on surfaces and after cycle it is dryed and exposed to normal atmosphere for longer time, and so on...
Parameters
Power Supply
1.5mADC
Zero Output
Not adjusted①
Span Output
100±20mV
Measuring Range(Absolute)
400KPa
Overload
2.0*F.S.
Temperature Compensation
No
Operating Temperature
-20~100°C
Storage Temperature
-40~125°C
Input Impedance
2.3KΩ~4KΩ
Accuracy(0~600KPa...6MPa)
0.5%F.S.@Room temp
Constructions
O-Ring
Viton(Ø16*1.7)
Diaphragm
Stainless steel 316L
Housing
Stainless steel
Filling Liquid
Silicone oil
Electrical Connection
5 Kovar pins
Diameter
Ø19mm
Height
5.6mm
Weight
9g
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Application:
Disposable indicator for monitoring sterilization procedures, should be a low cost pressure sensor which will be able to function in 140degC steam up to 3,8 bar absolute. It has to be all over encapsulated and protected against media.
Disposable indicator in this case means that there it lasts 500 cycles of sterilization then it is disposed (no battery change or recalibration). So it is basically disposable after shelf life. Longest sterilitation cycle last app 18 min, 134degC, 3,6 Bar abs. During this cycle steam is condesating on surfaces and after cycle it is dryed and exposed to normal atmosphere for longer time, and so on...
Parameters
Power Supply |
1.5mADC |
Zero Output |
Not adjusted① |
Span Output |
100±20mV |
Measuring Range(Absolute) |
400KPa |
Overload |
2.0*F.S. |
Temperature Compensation |
No |
Operating Temperature |
-20~100°C |
Storage Temperature |
-40~125°C |
Input Impedance |
2.3KΩ~4KΩ |
Accuracy(0~600KPa...6MPa) |
0.5%F.S.@Room temp |
Constructions
O-Ring |
Viton(Ø16*1.7) |
Diaphragm |
Stainless steel 316L |
Housing |
Stainless steel |
Filling Liquid |
Silicone oil |
Electrical Connection |
5 Kovar pins |
Diameter |
Ø19mm |
Height |
5.6mm |
Weight |
9g |
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor