Low cost pressure sensor 50psi for water application
2015-02-28
Application:
I will use the sensors on a working model of a steam locomotive.
Test Medium:
The medium is water
Temperature:
the working temperature will be 70 °C or less, the environment temperature 35 °C maximum.
low cost pressure sensor 50psi for water application
Parameters
Supply Voltage
5VDC
Output Signal
0.5~4.5V
Measuring Range
350KPa gauge
Proof Pressure
2.0*F.S.
Accuracy
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max)
3%F.S.@T<0°C & T>80°C
Operating Temp
-20~105°C
Mechanical Configurations
Pressure Connection
1/8”NPT
Electrical Connection
3 Pin Packard
Sealing Rating
IP65
O-ring
Viton
Housing
Brass
Diaphragm
Stainless Steel 316L
Input and Output
Pressure- KPa
0
50
100
150
200
250
300
350
Voltage- V
0.5
1.071
1.643
2.214
2.786
3.357
3.929
4.5
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Application:
I will use the sensors on a working model of a steam locomotive.
Test Medium:
The medium is water
Temperature:
the working temperature will be 70 °C or less, the environment temperature 35 °C maximum.
low cost pressure sensor 50psi for water application
Parameters
Supply Voltage |
5VDC |
Output Signal |
0.5~4.5V |
Measuring Range |
350KPa gauge |
Proof Pressure |
2.0*F.S. |
Accuracy |
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max) |
3%F.S.@T<0°C & T>80°C |
|
Operating Temp |
-20~105°C |
Mechanical Configurations
Pressure Connection |
1/8”NPT |
Electrical Connection |
3 Pin Packard |
Sealing Rating |
IP65 |
O-ring |
Viton |
Housing |
Brass |
Diaphragm |
Stainless Steel 316L |
Input and Output
Pressure- KPa |
0 |
50 |
100 |
150 |
200 |
250 |
300 |
350 |
Voltage- V |
0.5 |
1.071 |
1.643 |
2.214 |
2.786 |
3.357 |
3.929 |
4.5 |
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor