Automotive pressure sensor 150psi for automotive gauges
2015-03-04
Hi, We are manufactures of automotive Gauges and are looking for some Oil pressure senders to sell with them. SS204 series in 145psi or 150psi with both Brass and Stainless steel housings. We are looking for the most cost effective parts and require the connector to be the 3 pin Packard type in all cases. The Pressure port 1/8”NPT is required.
automotive pressure sensor 150psi for automotive gauges
Parameters
Supply Voltage
5VDC
Output Signal
0.5~4.5
Measuring Range
0~150PSI
Proof Pressure
2.0*F.S.
Accuracy
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max)
3%F.S.@T<0°C & T>80°C
Operating Temp
-20~105°C
Mechanical Configurations
Pressure Connection
1/8”NPT
Electrical Connection
3 Pin Packard
Sealing Rating
IP65
O-ring
Viton
Housing
Brass
Diaphragm
Stainless Steel 316L
Input and Output
Input(psi)
0
30
60
90
120
150
Output(V)
0.5
1.3
2.1
2.9
3.7
4.5
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Hi, We are manufactures of automotive Gauges and are looking for some Oil pressure senders to sell with them. SS204 series in 145psi or 150psi with both Brass and Stainless steel housings. We are looking for the most cost effective parts and require the connector to be the 3 pin Packard type in all cases. The Pressure port 1/8”NPT is required.
automotive pressure sensor 150psi for automotive gauges
Parameters
Supply Voltage |
5VDC |
Output Signal |
0.5~4.5 |
Measuring Range |
0~150PSI |
Proof Pressure |
2.0*F.S. |
Accuracy |
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max) |
3%F.S.@T<0°C & T>80°C |
|
Operating Temp |
-20~105°C |
Mechanical Configurations
Pressure Connection |
1/8”NPT |
Electrical Connection |
3 Pin Packard |
Sealing Rating |
IP65 |
O-ring |
Viton |
Housing |
Brass |
Diaphragm |
Stainless Steel 316L |
Input and Output
Input(psi) |
0 |
30 |
60 |
90 |
120 |
150 |
Output(V) |
0.5 |
1.3 |
2.1 |
2.9 |
3.7 |
4.5 |
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor