Definition of Protection Grade
2015-03-09
A brief description of the definition
0, No protection
1, Anti-vertical fall of water droplets, water droplets falling vertically without causing harmful effects
2, Anti-vertical drops fall when the housing tilted up to 15deg, When the the housing tilt up at any angle not exceeding 15deg on either side of the vertical, the vertical fall of water droplets will not cause harmful effects
3, Water and fog resistant, spray in any angle not exceeding 60 ° in any vertical side will not cause harmful effects
4, Water repellent, Splashing against the the housing from any direction will not cause harmful effects
5, Anti-spray, Water from any direction against the the housing will not cause harmful effects
6, Anti- Strong spray, Spray the strong water to the housing from any direction will not cause harmful effects
7, Anti temporary immersion, Under normal temperature and pressure, when the housing temporarily immersed in 1M deep water will not cause harmful effects
8, Anti continuous immersion, Continuous immersion in water will not cause harmful effects.
Industrial applications, IP protection must be considered:
1, For outdoor systems (automotive) IP65 protection is recommended. Anti-dust and anti-water.
2, On the outdoor warehouse forklift system should not be used IP20 protection
3, Level measurement, using the control system of IP67
4, Not all systems provide a high level of protection is no problem at all, high water proof usually requires installation completely sealed, this will cause cooling problems. System errors caused by overheating may occur. Therefore, the need for additional cooling devices.
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
A brief description of the definition
0, No protection
1, Anti-vertical fall of water droplets, water droplets falling vertically without causing harmful effects
2, Anti-vertical drops fall when the housing tilted up to 15deg, When the the housing tilt up at any angle not exceeding 15deg on either side of the vertical, the vertical fall of water droplets will not cause harmful effects
3, Water and fog resistant, spray in any angle not exceeding 60 ° in any vertical side will not cause harmful effects
4, Water repellent, Splashing against the the housing from any direction will not cause harmful effects
5, Anti-spray, Water from any direction against the the housing will not cause harmful effects
6, Anti- Strong spray, Spray the strong water to the housing from any direction will not cause harmful effects
7, Anti temporary immersion, Under normal temperature and pressure, when the housing temporarily immersed in 1M deep water will not cause harmful effects
8, Anti continuous immersion, Continuous immersion in water will not cause harmful effects.
Industrial applications, IP protection must be considered:
1, For outdoor systems (automotive) IP65 protection is recommended. Anti-dust and anti-water.
2, On the outdoor warehouse forklift system should not be used IP20 protection
3, Level measurement, using the control system of IP67
4, Not all systems provide a high level of protection is no problem at all, high water proof usually requires installation completely sealed, this will cause cooling problems. System errors caused by overheating may occur. Therefore, the need for additional cooling devices.
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor