Shantu logo

Language

  • English
  • العربية
  • français
  • Deutsch
  • Indonesia
  • italiano
  • 한국의
  • português
  • русский
  • español
  • Türkiye

Flush diaphragm pressure sensor 4-20mA for vapour or gas
2015-03-25

I would like to get pressure transmitter range is -1bar to 3bar. Output is 4-20mA or 0-10V. Temperature is about 90degC. For sugar mill eveporator. medium is vapour or gas.

Flush diaphragm pressure sensorFlush pressure sensor

Flush Diaphragm Pressure Transmitter SS402 Series

Total error band inside the compensated temperature range
±0.5%
Response time
< 4 ms
Overload pressure
2.0 × FS (≤ 250 bar)
1.5× FS (> 250 bar)
Pressure Range
-1 to 3bar
Pressure type
Vented gauge
Stability
≤0.2%F.S./Year
Temp Coefficient
±0.03%F.S./°C

Output signal
4 − 20 mA
Supply voltage [UB]
12-36V
Load [RL] (load connected to 0 V)
RL ≤ (UB-12V)/0.02 A
Polarity protected
yes
Short-circuit protected
yes

Medium temperature range
-40°C → +100°C
Ambient temperature range (depending on electrical connection)
-20°C → +80°C
Compensated temperature range
-10°C → +70°C
EMC - Emission
EN 61000-6-3
EMC Immunity
EN 61000-6-1
Insulation resistance
>100 MΩ at 500 V

Materials
Diaphragm
Stainless steel 316L
Enclosure
Stainless steel 304
Electrical connections
PA
Weight (depending on pressure connection and electrical connection)
200g
Pressure Connection
G1/2”
Electrical Connection
DIN43650A(Hirschmann)