Automotive pressure sensor for diesel trucks and tractors
2015-04-03
Hi i am looking for a low cost type pressure sensor for diesel trucks and tractors. The measuring medium is Oil, water, air, and diesel fuel. the medium working temperature is 0 C to 100 C. Pressure 150psi is ok.
SS208 series Automotive pressure sensor for diesel trucks and tractors
Parameters
Supply Voltage
5VDC
Output Signal
0.5~4.5V
Measuring Range
150psi
Proof Pressure
2.0*F.S.
Accuracy
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max)
3%F.S.@T<0°C & T>80°C
Operating Temp
-40~105°C
Mechanical Configurations
Pressure Connection
1/8”NPT
Electrical Connection
3 Pin Packard | Direct Cable
Sealing Rating
IP65
Housing
Stainless Steel
Diaphragm
Stainless Steel 316L
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Hi i am looking for a low cost type pressure sensor for diesel trucks and tractors. The measuring medium is Oil, water, air, and diesel fuel. the medium working temperature is 0 C to 100 C. Pressure 150psi is ok.
SS208 series Automotive pressure sensor for diesel trucks and tractors
Parameters
Supply Voltage |
5VDC |
Output Signal |
0.5~4.5V |
Measuring Range |
150psi |
Proof Pressure |
2.0*F.S. |
Accuracy |
1%F.S.@0~80°C(typical), 2%F.S.@0~80°C (max) |
3%F.S.@T<0°C & T>80°C |
|
Operating Temp |
-40~105°C |
Mechanical Configurations
Pressure Connection |
1/8”NPT |
Electrical Connection |
3 Pin Packard | Direct Cable |
Sealing Rating |
IP65 |
Housing |
Stainless Steel |
Diaphragm |
Stainless Steel 316L |
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor