Ceramic pressure transducer voltage output for lube oil
2015-05-18
Hello sendo sensor, I need to source a ceramic pressure transducer that is a close or identical fit to a Metallux me-707-A-002-01-01 or me-780-A-002-0-0-0-0-0. That is; a 96% AL03 ceramic flat membrane absolute pressure sensor with 18mm dia disc, <=1%FS accuracy, 0-2 bar range, ratiometric output .5-4.5V, 5V power, 3 wire unit.
I believe I need a PS100E01 A01 A01, but I will let you confirm.. the sensor will be used on either side of a flow cell in our LNF instrument, the medium is Lube oil, with any small percentages of water, debris, etc. that may accompany, and the RT to 50C at most.
PS100E01 Series 0.5-4.5V Ceramic Pressure Sensor
Features
1,High accuracy and high stability
2,Wide choice of measuring ranges
3,Solid ceramic sensitive diaphragm
4,Smart volume, easy for encapsulation
5,Excellent shock and vibration resistance
6,Excellent corrosion and abrasion resistance
7,Low cost, extreme extensive application range
8,Thermally compensated, wide-range operating temperature
Descriptions
PS100E01 series low cost ceramic pressure sensors are made with ceramic cell(Al2O3 96%) and work following the piezoresistive principle, the signal conditioning electronics are added on one side of ceramic diaphragm where the wheatstone bridge is screen printed, offer 0.5-4.5V, 0.2-4.5V ratiometric signal(Customized is available), it has been developed for low cost applications (e.g. automotive applications). PS100E01 series have the reinforced outer area(monolithic structure), the sensor can be mounted in a plastic or metallic case by using O-ring, and thanks to the good chemical resistance of the ceramic, the sensors can measure pressure in nearly all aggressive media.
Parameters
Power Supply
5VDC
Output Signal
0.5-4.5V
Pressure Range
0~2Bar
Temperature Characteristic
±0.02%FS/ºC (25ºC~85ºC)
Operating Temperature
-40~125ºC
Material
Ceramic Al2O3 96%
Sensor type
Gauge
Technology
Piezoresistive
Weight
8g
Unit: Bar
Rated Range
2
5
10
20
30
50
100
200
400
Over Pressure
4
10
20
40
60
100
200
400
600
Burst Pressure
7
15
35
70
90
150
250
450
600
Accuracy
±1.5%FS
±1.0%FS
±1.5%FS
Accuracy including Linearity, Hysteretic, Repeatability @25ºC/room temperature
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Hello sendo sensor, I need to source a ceramic pressure transducer that is a close or identical fit to a Metallux me-707-A-002-01-01 or me-780-A-002-0-0-0-0-0. That is; a 96% AL03 ceramic flat membrane absolute pressure sensor with 18mm dia disc, <=1%FS accuracy, 0-2 bar range, ratiometric output .5-4.5V, 5V power, 3 wire unit.
I believe I need a PS100E01 A01 A01, but I will let you confirm.. the sensor will be used on either side of a flow cell in our LNF instrument, the medium is Lube oil, with any small percentages of water, debris, etc. that may accompany, and the RT to 50C at most.
PS100E01 Series 0.5-4.5V Ceramic Pressure Sensor
Features
1,High accuracy and high stability
2,Wide choice of measuring ranges
3,Solid ceramic sensitive diaphragm
4,Smart volume, easy for encapsulation
5,Excellent shock and vibration resistance
6,Excellent corrosion and abrasion resistance
7,Low cost, extreme extensive application range
8,Thermally compensated, wide-range operating temperature
Descriptions
PS100E01 series low cost ceramic pressure sensors are made with ceramic cell(Al2O3 96%) and work following the piezoresistive principle, the signal conditioning electronics are added on one side of ceramic diaphragm where the wheatstone bridge is screen printed, offer 0.5-4.5V, 0.2-4.5V ratiometric signal(Customized is available), it has been developed for low cost applications (e.g. automotive applications). PS100E01 series have the reinforced outer area(monolithic structure), the sensor can be mounted in a plastic or metallic case by using O-ring, and thanks to the good chemical resistance of the ceramic, the sensors can measure pressure in nearly all aggressive media.
Parameters
Power Supply |
5VDC |
Output Signal |
0.5-4.5V |
Pressure Range |
0~2Bar |
Temperature Characteristic |
±0.02%FS/ºC (25ºC~85ºC) |
Operating Temperature |
-40~125ºC |
Material |
Ceramic Al2O3 96% |
Sensor type |
Gauge |
Technology |
Piezoresistive |
Weight |
8g |
Unit: Bar
Rated Range |
2 |
5 |
10 |
20 |
30 |
50 |
100 |
200 |
400 |
Over Pressure |
4 |
10 |
20 |
40 |
60 |
100 |
200 |
400 |
600 |
Burst Pressure |
7 |
15 |
35 |
70 |
90 |
150 |
250 |
450 |
600 |
Accuracy |
±1.5%FS |
±1.0%FS |
±1.5%FS |
Accuracy including Linearity, Hysteretic, Repeatability @25ºC/room temperature
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor