Ceramic pressure sensor 6bar for gasoline trucks
2015-06-08
Hello sendo sensor, I’m electronic engineer at XXX. Actually we’re developing a 0-6 bar pressure sensor. I would like to get a quotation for the component (10,000 units): PS100 C 02. The ceramic sensors will be used in trucks, the medium is gasoline, oil and air. The working temperature from -40 °C to 125 °C will be ok. Please send us some suggestions.
PS100 Series ceramic pressure sensor
Features
1,High accuracy and high stability
2,Wide choice of measuring ranges
3,Solid ceramic sensitive diaphragm
4,Smart volume, easy for encapsulation
5,Excellent shock and vibration resistance
6,Excellent corrosion and abrasion resistance
7,Low cost, extreme extensive application range
8,Thermally compensated, wide-range operating temperature
Descriptions
PS100 series ceramic pressure sensor is a dry-type ceramic piezoresistive pressure sensor made of the material ceramic Al2O3 96% by special technology, work following the piezoresistive principle, the wheatstone bridge is screen printed directly on one side of the ceramic diaphragm and the diaphragms’ opposite side can be exposed directly to the medium to be measured. Ceramic is a recognized material of high elasticity, corrosion and abrasion resistance, strong shock and vibrant resistance, no additional protection is normally required, and the thermal stability can make its operating temperature up to -40~125ºC.
PS100 series have the characteristic of small dimension, 18 mm diameter, 6.35 mm thickness, 2~400bar range, high performance-price ration, it has been widely used in various pressure-measuring occasion. Typical applications: process control, environment control, hydraulic pressure and pneumatic equipment, servo valve and drive, chemical products, chemical industry, medical instrument, and other fields.
Parameters
Sensor type
Gauge
Material
Ceramic AL2O3 96%
Power Supply
3-30VDC
Bridge Resistance
11K±20%
Pressure Range
0~2Bar...400Bar
Response Time
<1mS
Combined Accuracy
0.2%(Linearity,Hysteretic,Repeatability)
Zero Output
0±0.2mV/V @25ºC
Sensitivity
2.0~4.8mV/V
Temperature Characteristic
±0.02%FS/ºC (25ºC~85ºC)
Stability
<0.2%FSO/year
Operating Temperature
-40~125ºC
Insulation
>2KV
Dimension
18*6.35mm
Weight
5g
LATEST NEWS
More
-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor
Hello sendo sensor, I’m electronic engineer at XXX. Actually we’re developing a 0-6 bar pressure sensor. I would like to get a quotation for the component (10,000 units): PS100 C 02. The ceramic sensors will be used in trucks, the medium is gasoline, oil and air. The working temperature from -40 °C to 125 °C will be ok. Please send us some suggestions.
PS100 Series ceramic pressure sensor
Features
1,High accuracy and high stability
2,Wide choice of measuring ranges
3,Solid ceramic sensitive diaphragm
4,Smart volume, easy for encapsulation
5,Excellent shock and vibration resistance
6,Excellent corrosion and abrasion resistance
7,Low cost, extreme extensive application range
8,Thermally compensated, wide-range operating temperature
Descriptions
PS100 series ceramic pressure sensor is a dry-type ceramic piezoresistive pressure sensor made of the material ceramic Al2O3 96% by special technology, work following the piezoresistive principle, the wheatstone bridge is screen printed directly on one side of the ceramic diaphragm and the diaphragms’ opposite side can be exposed directly to the medium to be measured. Ceramic is a recognized material of high elasticity, corrosion and abrasion resistance, strong shock and vibrant resistance, no additional protection is normally required, and the thermal stability can make its operating temperature up to -40~125ºC.
PS100 series have the characteristic of small dimension, 18 mm diameter, 6.35 mm thickness, 2~400bar range, high performance-price ration, it has been widely used in various pressure-measuring occasion. Typical applications: process control, environment control, hydraulic pressure and pneumatic equipment, servo valve and drive, chemical products, chemical industry, medical instrument, and other fields.
Parameters
Sensor type |
Gauge |
Material |
Ceramic AL2O3 96% |
Power Supply |
3-30VDC |
Bridge Resistance |
11K±20% |
Pressure Range |
0~2Bar...400Bar |
Response Time |
<1mS |
Combined Accuracy |
0.2%(Linearity,Hysteretic,Repeatability) |
Zero Output |
0±0.2mV/V @25ºC |
Sensitivity |
2.0~4.8mV/V |
Temperature Characteristic |
±0.02%FS/ºC (25ºC~85ºC) |
Stability |
<0.2%FSO/year |
Operating Temperature |
-40~125ºC |
Insulation |
>2KV |
Dimension |
18*6.35mm |
Weight |
5g |
LATEST NEWS
More-
- 0 30 psi flush element pressure sensor 0.5 to 4.5 volt 3wire | SS40212N200K4.5V | Sendo Sensor
- 0 2 bar flush diaphragm seal pressure sensor 0 to 5 volt 3wire | SS40212N200K5V | Sendo Sensor
- 30 psi flush diaphragm pressure sensor 0 to 10 volt 3wire | SS40212N200K10V | Sendo Sensor
- 2 bar flush pressure sensor 4 20ma 2 wire current | SS40212N200K20M | Sendo Sensor
- 0.5 to 4.5 vdc 3wire output flushed face pressure sensor 0 to 30 psi | SS40212G200K4.5V | Sendo Sensor
- 0 to 5 vdc 3wire output flushed diaphragm pressure sensor 0 to 2 bar | SS40212G200K5V | Sendo Sensor
- 0 to 10 vdc 3wire output flushed pressure sensor 30 psi | SS40212G200K10V | Sendo Sensor
- 4 20ma 2 wire current flush port pressure sensor 2 bar vented gauge | SS40212G200K20M | Sendo Sensor
- 0 50 psi flush pressure sensor 0.5 4.5 v 3wire | SS40212N350K4.5V | Sendo Sensor
- 0 3.5 bar flushed face pressure sensor 0 5 v | SS40212N350K5V | Sendo Sensor