Shantu logo


  • English
  • العربية
  • français
  • Deutsch
  • Indonesia
  • italiano
  • 한국의
  • português
  • русский
  • español
  • Türkiye

Brief description of OEM pressure sensor and applications

industrial oem pressure sensorSS301 Series OEM pressure sensor for air and water applications
SS301 series OEM pressure sensor take advantage of piezoresistive technology, and are fully steel media isolating with stainless steel and no internal elastomer seals. This design often makes them resistant to harsh, aggressive media and challenging environments. The sensor is mounted in a stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. SS301 series offer the pressure range of minimum 10kpa and maximum 20mpa for OEM applications. High measurement accuracy is provided through extensive sensor characterization.
low cost oem pressure sensorSS102 series OEM pressure sensor
The SS102 Series isolate pressure transducers cover the pressure ranges from 100 mbar to 25bar. It use a high-stability silicon chip which is protected by 316L stainless steel diaphragm and silicone oil. The applied pressure acts on stainless steel diaphragm, then pass to the silicon chip through silicone oil. Typically application in level measurement, industrial process control, gas and liquid pressure measurement. Standard size Ø19*10mm, Stainless steel 316 diaphragm and housing.
Oil pressure Sensor autometerSS207 series oil pressure sensor
SS207 Series Oil Pressure Sensor is the one of the most mature product in Sendo, it is OEM tested, with high accuracy, long term stability, good repeatability, has been wildly used in automotive oil system, automotive AC system, automotive brake system and other car security system. available with range 15psi, 30psi, 50psi, 75psi, 100psi, 150psi.
Low cost ceramic pressure sensorSS307 series low cost pressure sensor
SS307 Series Low Cost Pressure Sensor give out a current signal 4~20mA or voltage signal 1~10V directly proportional to the pressure value present on the system to which they are connected.
pressure sensor for industrial applicationsSS302 series industrial pressure sensor
SS302 Series Industrial Pressure Transmitter is piezo-resistive pressure transmitter with zero and span adjustable. It uses high stable and reliable pressure transducer and special circuit board to produce transmitter, and performance is good and reliable.
isolated oem pressure transducerSS103 series isolated pressure transducer
SS103 Series Isolated Pressure Transducer is the most economic version for pressure ranges from 35KPa to 7MPa. They have a height of only 5.6mm without compromising quality and performance. This piezoresistive measuring cell are made of stainless steel 316L.
oem ac pressure sensorSS205 series AC pressure sensor
SS205 Series A/C pressure sensor designed with piezoresistive technology offer absolute prssure and gauge pressure, typical pressure connection is 7/16-20UNF screw.
oem flush diaphragm pressure transducerSS115 series flush pressure transducer
Flush diaphragm pressure transducer designed by piezoresistive sensor technology, the silicon chip is protected by 316L stainless steel and silicone oil filled in the isolated housing, meet “clean in place” (CIP) and “sterilize in place” (SIP) maintenance procedures demand, typically for use in food, process and industrial applications where the media is either viscous, or is otherwise liable to block the port of a conventional pressure transducer with a recessed diaphragm or pressure port. SS115 series available with low pressure pressure measurement, the pressure available from -1bar to 400bar. Working temperature from -20 to 80°C. SS114 series are integrated with cooling fins, working temperature can up to 125°C, and pressure start from 2.5bar.
OEM Pressure TransmitterSS305 series piezoresistive pressure transmitter
SS305 series high overload pressure sensor is a portfolio of highly configurable pressure sensors that use piezoresistive sensing technology with a special signal conditioning circuit in a stainless steel housing, meets the high burst protection demands and is suitable for the use in all types of severe industrial applications. SS305 series is fully calibrated and compensated for offset, sensitivity, temperature effects and non-linearity, provides a Total Error Band of ±0.5% over the operating temperature range of -10 ºC to 80 ºC [14 °F to 176 °F]. SS305 series is a precise pressure measurement solution that optimizes system performance at a competitive cost, numerous standard or custom connectors, ports, pressure ranges and types, and output options.
flush mount pressure sensorSS402 series flush pressure sensor
SS402 series flush pressure sensors utilize piezoresistive technology with a high performance silicon chip inside, the applied pressure acts on stainless steel 316L diaphragm, then pass to the silicon chip through silicon oil, available pressure ranges spanning from 5 psig up to 5800 psig. Typically applications: designed for use in food, process and industrial applications where the media is either viscous, or is otherwise liable to block the port of a conventional pressure transducer with a recessed diaphragm or pressure port.
piezoresistive measuring cellSS108 series piezoresistive pressure cell
SS108 Series Piezoresistive Pressure Cell is with isolated construction and precise compensation. It uses high stable silicon die, housing with outer diameter Ф15mm 316L stainless steel housing.It covers all the ranges from 400KPa to 100MPa.
oem ceramic pressure sensorPS100 series ceramic pressure sensor
PS100 Series Ceramic sensor chip is a dry-type ceramic piezoresistive sensor chip by special technology. Ceramic is a recognized material of high elasticity, corrosion & abrasion resistance, strong shock and vibrant resistance. The thermal stability can make its operating temperature up to -20~80, It achieves high accuracy, high stability. Electrical insulation 2kV, strong output signal, excellent long term stability.