Descriptions
SS635 series submersible pressure transmitter G1/2 are designed by piezoresistive technology, enhanced double O-ring(viton) structure guarantee the IP68 grade protection, suitable for liquid level or depth measurement. The hermetically sealed housing makes the sensor suitable for immersion in almost all kinds of industrial liquids and oils.
SS635 series is fitted with a traditional G1/2 pressure connection (various pressure connections/screw can be customized by SENDO powerful customization system), as standard to give the best in media compatibility, available with standard voltage and 4-20mA current outputs, give accurate readings at pressure ranges from 100 mBar.
Installation and precautions
● The installation place should be easy to operation and fixing
● When installation, the metal probe should sink to the bottom of the container
● The installation place should be away from the heat source as far as possible
● The installation place should be away from the vibration source as far as possible
● If the customer need to connect with other cable, waterproofing measures must be taken
● When the sensor put into the water, it is the best that the sensor can be fixed, and away from the inlet
Precautions for safety use
● Clean the metal probe(sensor) regularly to avoid block the pressure port
● The cable is a special waterproof cable, abrasion, puncture, and cut the cable is not allowed
● The wiring should strict reference to the electrical connection, wrong wiring will cause damage to the sensor
● A stainless steel 316L diaphragm is in the front part of the sensor, artificially foreign body touch is not allowed
|