Home » Pressure » mV output signal » Piezoresistive ceramic pressure sensors
Piezoresistive ceramic pressure sensors
PS100 series piezoresistive ceramic pressure sensors are based on ceramic. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured. Because of the excellent chemical resistance, no additional protection is normally required.
PS100 series ceramic thick film pressure sensor have 18 mm diameter and 6.35 mm thickness, cover the 2~400bar range, with the characteristic of small dimension and the thermal stability can make its operating temperature up to 125ºC, it has been widely used in various pressure-measuring occasion.
Pressure Ranges
0...2bar to 400bar(gauge only)
Power Supply
3...30Vdc, typically 5Vdc
Output Signals
mV signal
|